WALK-IN CHAMBER

WALKINLine

Larger designs with large capacities for large batches of samples. It presents a completely customized design based on the client’s existing space. Control of different variables, temperature, humidity, light intensity, CO2, irrigation, etc., according to customer specifications.

Additional information

Gross capacity (liters)	From 2000, To 60.000 liters
Configurable parameters	Air flow, CO2, Humidity Control, LED Lighting, Temperature Control

GENERAL SPECIFICATIONS

Designed for all types of applications where temperature and/or humidity control is necessary in different sectors.
Applications: Pharmaceutical stability, Plant growth, Arabidopsis, Stability control in foods and beverages. Algae growth. Drosophila or Entomology. Small animal husbandry. Low temperature chambers with photoperiod. Tissue culture. Refrigerated incubators. Seed drying chambers. Forensic, etc.
TEMPERATURE CONTROL: Temperature range from +4ºC to +60ºC.
TEMPERATURE AND HUMIDITY CONTROL: Humidity control: working range from 30% to 98% R.H.

TECHNICAL SPECIFICATIONS

Temperature control panel and other parameters with 7.0 “TFT touch screen.
Ultrasonic humidity generator and horizontal airflow recirculation system. (EGCS ALG HR)
Safety thermostat, avoids exceeding the temperature.
Electronic probe to measure humidity (4-20 mA) with precision / stability of +/- 3%.

TECHNICAL SPECIFICATIONS OF THE LIGHTS

Possible light positions: on door (LED), on door and rear (2S) or on trays (1/2/3/4 L).
2 independent LED light channels with one-to-one regulation: Channel 1 warm white light. Channel 2 cool white light.
Light intensity control from 10 to 180 μMol/m² x s PAR. Optionally up to 1,800 μMol/m² x s

Detalle Interior

Estantes interiores y Luces

CONTROL

4500 series controller, with graphical temperature and/or humidity display, intuitive and simple user control.
7.0″ TFT backlit graphic display.
Acoustic and visual alarm.
3 levels of numerical password protection (user, supervisor, technical service), with reprogrammable PIN codes.
Back-up battery, with automatic recharge, guaranteeing autonomy for 48 or 72 hours.

CONSTRUCTION

EXTERIOR	Galvanized sheet with epoxy finish.
INTERIOR	AISI304 stainless or interior lacquered, with sanitary profile included.
DOOR	Pivoting door with dimensions 800 x 1830 mm (width x height). Automatic closing with key lock and internal security opening.
PORT	40 mm cable gland with plug.
ISOLATION	CFC-free polyurethane, high pressure injected with a density of 45 kg/m3.
SHELVES	Optional. Made of stainless steel or duroaluminum with interchangeable height-adjustable shelves.
FLOOR	100 mm non-slip floor in AISI 304 stainless steel.
COOLING	Forced air ventilation. Cold control controlled by solenoid valve.
SENSORS	PT100 for temperature sensor and capacitive humidity probe.

OPTIONAL ACCESORIES

All our equipment has different optional elements to be able to meet the client’s maximum needs and be able to deliver equipment prepared for their real requirements. Depending on the application for which the chamber is intended, the accessories may vary.

Consult your testing requirements with our technical department so that they can advise you on the different optional elements that may interest you.

Optional negative temperatures: -5ºC /-10ºC /-20ºC /-30ºC / +70ºC / +80ºC.
Extended drying capacity up to +10% RH, with additional air dryer.
Condensing unit cooled by water or glycolated water,
CO2 control and supervision units.
CO2 scrubber to reduce carbon dioxide below ambient levels.
Simulation of fog or spray would lack its own point, I think it should go after this Risk systems.
Thermal decontamination system at 60°C
Bio-decontamination with hydrogen peroxide: allows the connection of an H2 O2 atomizer system
Automatic irrigation valve
Phenolic resin coating for entomology/insect breeding applications.
Continuous demineralization system for humidifier feed water.
Additional grommet for cables and tubes
Internal sockets.
Aeration kit for algae research and hydroponic crops
RS485/232 remote communication system.
Potential free output for remote alarm control (4-20 mA)
Communication software for PC on request.
GSM alarm module.
Ethernet output for remote connection via WiFi network and dedicated website, makes it possible to read and change parameters..
Digital printer for temperature and/or humidity.
7-day circular temperature/humidity recorder, with independent battery to work even in case of power failure. Includes 100 charts (approx. for 1.5 years).
Additional data loggers.

INQUIRIES FORM

REQUEST INFORMATION

Send us your inquiry about this product.

WALK-IN CHAMBER