EIC 853 con pared trasera perforada

EICS PRO

EICS PROLine | [ ICH Ready ]

Multi-purpose climate chamber with temperature and humidity control designed for stability tests. With horizontal or vertical air flow.

Additional information

Gross capacity (liters)

190, 350, 390, 490, 590, 665, 735, 860, 1180, 1490, 1850, 1904, 2190, 2305, 2798, 2950, 3498

Configurable parameters

Air flow, CO2, Humidity Control, LED Lighting, Temperature Control

Compatible with standard

ICH

GENERAL SPECIFICATIONS


 
  • Designed for the study of laboratory climates, pharmaceutical stability, cosmetics, food, R&D&I, microbiology, biotechnology, construction, cardboard, adhesives, electronics, etc.
  • Horizontal or vertical air flow, from the sides, uniform on all shelves, with speed regulation approx. 0.2 – 0.8m/s.
  • TEMPERATURE CONTROL EICHS MODELS Temperature range from +4 to +60 °C as standard, with lights on or off.
  • HUMIDITY AND TEMPERATURE CONTROL EICHS HR MODELS Humidity control from 30 to 90 % RH (±3 %), between +20 and +45 °C. Extendable down to 10 % RH (with rotary dehumidification) and up to 95 % RH; in certain cases, up to 98 % RH.
  • MODELS AND REFRIGERATION 18 models from 190 to 3,498 L gross, including the new EIC 163, 1903 and 2303. Natural refrigerant R-290 (GWP 3).
 

TECHNICAL SPECIFICATIONS


 

  • Temperature control panel and other parameters with 3.4 “TFT graphic display.
  • Ultrasonic humidity generator and horizontal airflow recirculation system.
  • Safety thermostat, avoids exceeding the temperature.
  • Electronic probe to measure humidity (4-20 mA) with precision / stability of +/- 3%.

 

OTHER SPECIFICATIONS


 

  • Homogeneity of +/-1.0 at 27ºC and +/- 1.5 at 40ºC inside the chamber..
  • Stability in the chamber +/-0.3ºC. at 27ºC and +/-0.5ºC, at 40ºC inside the chamber.
  • Humidity stability: +/- 3%, in a temperature range +20ºC to +45ºC.

CONTROL


 

  • Nanodac 4300 series controller, with graphic display of temperature and/or humidity, intuitive and simple user control. 7” touch panel option. EICHS HR MODELS.
  • Backlit 3.4″ TFT graphic display.
  • Acoustic and visual alarm.
  • 3 levels of numerical password protection (user, supervisor, technical service), with reprogrammable PIN codes.
  • Back-up battery, with automatic recharge, guaranteeing autonomy for 48 or 72 hours.

CONSTRUCTION


 

  EXTERIOR   Epoxy coated steel. 4 wheels and height-adjustable feet.
  INTERIOR   AISI304 stainless. Rounded corners and interior drainage.
  DOOR   Blind door with handle and key lock. 6mm thermal glass internal door.
  POWER   220-240V /1 F/ 50 Hz. 1.5 m cable with Schuko connector.
  ISOLATION   60mm CFC-free high-pressure injected polyurethane. Density of 40 kg/m3
  SHELVES   In stainless steel. perforated + height-adjustable guides. Max load 100 kg/m2.
  COOLING   Forced air ventilation. Cold control controlled by solenoid valve.

OPTIONAL ACCESORIES


 

  • Extended-range versions: down to -30 °C, and up to +70 °C or, in certain cases, +80 °C.
  • Extended drying capacity up to +10% RH, with additional air dryer.
  • FDA 21 CFR Part 11 package: Eurotherm Data Reviewer with Auditor function (audit trail and electronic signature) and IQ/OQ/PQ qualification documentation.
  • ICH Q1B photostability kit, option 2: cool white light and near UV, for confirmatory testing of 1.2 million lux·h and 200 Wh/m² of near UV.
  • Light radiation sensor, for control and recording of light parameters.
  • Additional trays.
  • Telescopic trays, with extraction system.
  • Additional pass ports for cables and tubes
  • 20 liter external water tank with electric pump and safety valve for the humidifier feed water.
  • Continuous demineralization system for the humidifier feed water.
  • Internal sockets.
  • Potential-free output for remote alarm control (4-20 mA).
  • GSM alarm module.
  • RS485/232 remote communication system.
  • Communication software for PC on request.
  • UV light tube for sterilization.
  • CO2 control and supervision units.
  • Water cooled condensing unit.
  • Digital printer for temperature and/or humidity.
  • Ethernet output for remote connection via WiFi network and dedicated website, makes it possible to read and change parameters.
  • Bio-decontamination with hydrogen peroxide: allows the connection of an H2 O2 atomizer system.
  • Thermal decontamination system at 60°C.
  • 7-day circular temperature/humidity recorder, with independent battery to work even in case of power failure. Includes 100 charts (approx. for 1.5 years).).Additional Data loggers.

UNDERSTANDING THE MODEL NAME



EICS

E – Equitec     I – Incubator / Incubador     C – Chamber / Cámara     S – Screen / con Pantalla

H – Horizontal Air Flow / Flujo Horizontal.    V – Vertical Air Flow / Flujo Vertical.     LED – Luces LED / LED Lights.     ICH – Standard / Norma ICH

LinkedIn
WhatsApp
Twitter
INQUIRIES FORM

REQUEST INFORMATION

Send us your inquiry about this product.

EICS PRO

EIC 853 con pared trasera perforada

Data protection. Controller: Testing Lab Equipments, S.L. Purpose: to answer your enquiry or request. Legal basis: pre-contractual steps taken at your request. Recipients: authorised TestingLab distributors when needed to serve you; we do not disclose your data for any other purpose. Rights: access, rectification, erasure and others, at contact@testinglab.es. More information in our Privacy policy.