Applications · ICH stability studies

Stability chambers for ICH stability studies

Stable temperature and humidity for months or years, with continuous data logging, for ICH Q1A(R2) stability studies, ICH Q1B photostability and GMP-regulated settings.

What a stability study demands

A stability study shows how a product changes over time under defined temperature and humidity conditions. The chamber has to hold them without interruption for the whole study, which can last several years.

The conditions are set by the ICH Q1A(R2) guideline for medicines, and the cosmetics, food and packaging industries use them as a reference. Beyond the climate, the lab needs to prove it: complete data records, alarms, qualification documents and, in GMP settings, secure electronic records.

Temperature

±2 °C tolerance in ICH conditions. The chambers achieve ±0.3 °C stability at +27 °C.

Humidity

±5 % RH tolerance. EIC offers 30 to 90 % RH as standard, extendable to 10-95 %.

Continuous logging

Temperature and humidity recorded throughout the study, with download and network connection.

Reliability

Independent safety thermostat, visual and audible alarms and a contact for remote alerts.

ICH Q1A(R2) stability conditions

StudyConditionsMinimum period at submission
Long term25 °C ± 2 °C / 60 % RH ± 5 % or 30 °C ± 2 °C / 65 % RH ± 5 %12 months
Intermediate30 °C ± 2 °C / 65 % RH ± 5 %6 months
Accelerated40 °C ± 2 °C / 75 % RH ± 5 %6 months
Refrigerated product, long term5 °C ± 3 °C12 months
Refrigerated product, accelerated25 °C ± 2 °C / 60 % RH ± 5 %6 months
Frozen product-20 °C ± 5 °C12 months
Climatic zone IVb (hot and very humid)30 °C ± 2 °C / 75 % RH ± 5 %12 months

Summary of the ICH Q1A(R2) guideline. Photostability is covered by ICH Q1B. Each study design depends on the product, the packaging and the target market.

Recommended chambers

EIC ProLine

ProLine

EIC ProLine

  • 18 volumes, from 190 to 3,500 L
  • +4 to +60 °C; options from -30 to +80 °C
  • Humidity 30 to 90 %, extendable to 10-95 %
  • Q1B photostability and FDA 21 CFR Part 11 package

Choose it if… you need large volumes, wide ranges or work in a GMP setting.

EICS product pageSeries catalogue

ERI INOX

EcoLine

ERI INOX

  • 5 sizes, from 150 to 1,345 L
  • Versions down to -20 °C
  • Optional 30 to 80 % humidity, extendable
  • Nanodac controller with data logging

Choose it if… you run standard ICH studies and want a compact, reliable chamber.

ERI INOX product pageSeries catalogue

EIC WK

WalkInLine

EIC WK walk-in

  • 6 to 50 m³, built to measure
  • For large batches and long studies
  • Nanodac series 4300 controller
  • Optional series 4500 touch screen

Choose it if… you store many batches or large packs at one condition.

Walk-in chamber product pageSeries catalogue

Options for regulated settings

FDA 21 CFR Part 11 package

Eurotherm Data Reviewer with Auditor function, for audit trail and electronic signature.

IQ/OQ/PQ documentation

Installation, operational and performance qualification protocols.

ICH Q1B photostability

Cool white and near-UV light kit, option 2: 1.2 million lux·h and 200 Wh/m².

Extended range

Down to -30 °C and up to +80 °C, and 10 to 95 % humidity with rotary dehumidification, on EIC ProLine.

Safety

Independent thermostat, visual and audible alarms, and a volt-free contact for alerts.

Logging and remote control

RS485/MODBUS port, paper chart recorder and remote control software.

How to choose your stability chamber

  1. Conditions. With one chamber per condition (long term, intermediate and accelerated), studies do not interrupt each other.
  2. Volume per condition. Work out batches times pull points over the whole study, not just at the start.
  3. Regulated setting. Under GMP, add the FDA 21 CFR Part 11 package and IQ/OQ/PQ documentation.
  4. Photostability. If you run ICH Q1B tests, order the chamber with the kit from the start.

Frequently asked questions

What conditions does the ICH Q1A(R2) guideline require?

For most medicines: long term at 25 °C / 60 % RH or 30 °C / 65 % RH, intermediate at 30 °C / 65 % RH and accelerated at 40 °C / 75 % RH, with ±2 °C and ±5 % RH tolerances. Refrigerated products use 5 °C ± 3 °C, and frozen products -20 °C ± 5 °C.

Do I need one chamber per condition?

It is recommended. Each chamber holds one condition, so door openings to pull samples for one study do not disturb the others. For small volumes, one compact chamber per condition is often more cost-effective than a large one.

Can ICH Q1B photostability tests be run?

Yes, with the optional cool white and near-UV kit following option 2 of the guideline. It allows confirmatory testing at 1.2 million lux·h and 200 Wh/m² of near UV.

What is needed to work under FDA 21 CFR Part 11?

The optional package includes Eurotherm Data Reviewer with audit trail and electronic signature, plus IQ/OQ/PQ documentation. Combined with the lab’s procedures, it allows secure, traceable electronic records.

Do the chambers comply with ICH?

They hold the long-term, intermediate and accelerated conditions the guideline requires, with continuous data logging. Validating the study also depends on the chamber’s qualification and each lab’s procedures.

Technical advice

Let’s talk about your study

Tell us which product you are testing, under which conditions and how many batches and pull points you will have. We will recommend the right configuration and send you the catalogue and a quote.

  • Model and option recommendation
  • Full series catalogue
  • Quote including qualification documents

Data protection. Controller: Testing Lab Equipments, S.L. Purpose: to answer your enquiry or request. Legal basis: pre-contractual steps taken at your request. Recipients: authorised TestingLab distributors when needed to serve you; we do not disclose your data for any other purpose. Rights: access, rectification, erasure and others, at contact@testinglab.es. More information in our Privacy policy.