New ERIS ALG INOX EcoLine Series catalogue: growth chambers for algae cultivation

Catálogo de la serie ERIS ALG INOX EcoLine de TestingLab junto a matraces con cultivo de microalgas / TestingLab ERIS ALG INOX EcoLine Series catalogue next to flasks of microalgae cultures
The ERIS ALG INOX EcoLine Series catalogue presents our algae growth chambers in 5 sizes, with multi-channel LED lighting, CO2 control, built-in shakers and the new ALGAEFLOW bubbling system.

In this article:

The ERIS ALG INOX EcoLine Series brings together our algae growth chambers for algae, cyanobacteria and other photosynthetic microorganisms. They precisely control temperature, light and, when needed, humidity and CO2. The new catalogue covers the 5 sizes, from 150 to 1,345 litres gross, and every option for algae: CO2 bubbling, shakers, custom spectra and trays lit from below.

What the catalogue includes

  • Series overview and applications.
  • Temperature, humidity, airflow and refrigeration.
  • LED lighting and spectra.
  • Series 4500 controller and remote control software.
  • Algae options: CO2, shaking and trays.
  • Technical data for each model and accessories.

New: ALGAEFLOW CO2 bubbling

ALGAEFLOW recirculates the chamber air, with its CO2 already stabilised, and delivers it directly to flasks or glass tubes at an adjustable flow rate. It works together with CO2 control by set point, which measures the concentration with an NDIR sensor and regulates it from the main controller.

Models and dimensions

Model Usable / gross volume (L) External dimensions, W × D × H (mm)
ERIS 155 ALG INOX 105 / 150 605 × 695 × 830
ERIS 255 ALG INOX 222 / 250 675 × 765 × 1,540
ERIS 455 ALG INOX 384 / 455 670 × 785 × 1,955
ERIS 855 ALG INOX 718 / 855 797 × 1,085 × 1,955
ERIS 1345 ALG INOX 1,160 / 1,345 1,385 × 916 × 1,955

Temperature, humidity and air

  • Temperature: +10 to +55 °C as standard. Optional versions go down to +4, 0, -10 or -20 °C.
  • Stability and uniformity: ±0.3 °C and ±1 °C at +27 °C.
  • Optional relative humidity: 30 to 80 %, with the humidifier installed outside the chamber.
  • Airflow: horizontal at shelf level, with upward return, so that conditions are even around the cultures.
  • Interior: AISI 304 stainless steel with rounded corners and drain.
  • Refrigeration: natural R-290 refrigerant with a GWP of 3.

Lighting for algae

  • Standard: 4000 K white LED, up to 120 µmol/m²/s at 150 mm, with full photoperiod control.
  • 3L LED version: 3 independent channels in red, blue and neutral white.
  • More intensity: configurations up to 450 µmol/m²/s at 150 mm, and more on request.
  • Custom multi-channel spectra: white, blue, red and black light (UV-A), with independent control of each channel.

Shaking and sample handling

  • Built-in orbital or reciprocating shakers: for beakers, Erlenmeyer flasks and Petri dishes. They keep a constant speed whatever the load, start and stop smoothly and resume the program after the door is opened or after a power cut.
  • Transparent trays: let light through from below.
  • Reinforced telescopic shelf: perforated stainless steel, for heavy equipment or cultures.
  • 40 mm cable port and optional internal sockets: to power shakers or other equipment during the trial.

How to choose the model

  1. Culture format: count flasks, tubes or photobioreactors and check that they fit together with the shaker if you will use one.
  2. Light: for spectrum trials, choose the multi-channel version. For strain maintenance the standard LED is usually enough.
  3. CO2: if the culture needs it, combine set-point control with ALGAEFLOW to bring the CO2 into the medium.
  4. Temperature: cold-water or polar strains need the version that goes below +10 °C.

Frequently asked questions

What is ALGAEFLOW?

A CO2 recirculation and distribution system for algae cultures. It takes air from the chamber, with a stabilised CO2 concentration, and bubbles it into flasks or glass tubes at an adjustable flow rate.

Can samples be shaken inside the chamber?

Yes. Orbital or reciprocating shakers can be built in, with optional internal sockets to power them.

What is the difference from the EGCS ProLine?

The EGCS ProLine is the high-end range. It has more volumes, a range of -30 to +80 °C and an algae pack with the same options. The ERIS ALG INOX is the dedicated, more compact solution for algae.

Request the catalogue

Leave us your email and we will send you the full ERIS ALG INOX EcoLine Series catalogue.

We send it to you!

Data protection. Controller: Testing Lab Equipments, S.L. Purpose: to answer your enquiry or request. Legal basis: pre-contractual steps taken at your request. Recipients: authorised TestingLab distributors when needed to serve you; we do not disclose your data for any other purpose. Rights: access, rectification, erasure and others, at contact@testinglab.es. More information in our Privacy policy.

Related catalogues

Share this information: